Water Meters, Test Strips & Sup
|
| |
Product |
Price |
View |
|
AlkaPro Alkaline Drops
Alkalize "on the go" with AlkaPro acid neutralizing drops.
These drops are great for traveling or to use in restaurants when you may not have your AlkaBlue ionized alkaline water with you. Your AlkaPro drops come in a convenient 1.3 oz. squeeze bottle with a balanced electrolyte formula of concentrated alkalizing minerals. This bottle size easily fits in your pocket or purse
It is important to note that AlkaPro Drops are no substitute for ionized alkaline water. However, this concentrated alkaline formula raises the alkalinity of any beverage. The drops are great to use in “regular” water, coffee, tea, sodas, alcoholic drinks and other acidic beverages for a smoother taste.
The AlkaPro drops are easy to use. Just add 3 to 4 drops into "regular" water to raise it’s alkalinity. 6 or more drops should be added to more acidic beverages. |
15.95 |
View |
|
HANNA Champ pH Meter
Pocket Size pH meter, incl batteries |
67.00 |
View |
|
Instant Oxygen water Supplement
Our bodies obtain oxygen when we breath. But what many of us don’t know is that we also obtain oxygen from water. In fact, we obtain about 25% of oxygen from the water we drink. At younger ages, it is not difficult to maintain appropriate oxygen levels in our blood, cells and lungs. As we age, our systems no longer function at full capacity.
In today’s society there are many contributing factors that reduce the amount of oxygen in our bodies. Soda pop, carbonated beverages, smoking, alcohol, polluted air, stress, illness, lack of appropriate nutrients and other things rob us of oxygen. Oxygen is vital to our life. It is the molecule in the blood that carries all of the nutrients throughout our bodies. Oxygen is needed to aid in the conversion of nutrients to energy. Oxygen and water are required for making nutrients such as vitamins, minerals and trace minerals soluble and bioavailable. For more detail on the importance of water in this process, please refer to our paper on Water in the Body.
Our formula of trace minerals, vitamins & minerals is totally water soluble and passes through a #5 Whatmann filter. The formula contains important antioxidant nutrients, such as Vitamins C, E and Selenium. When taken in combination with Instant Oxygen and Acid pHree, optimum utilization of oxygen & nutrients occurs, free radicals are neutralized and the electrolyte balance is restored.
Oxygen is required to eliminate waste and toxins in the body, especially carbon dioxides. Red blood cells become energized. Without enough oxygen, we slowly kill our cells and accelerate the aging & disease process. Oxygen therapy is even utilized by some healing practitioners in the treatment of cancer and other diseases. Oxygen accelerates the healing of cuts, burns and infections in the body. Our body can better resist the effects of viruses and bacteria, and we can promote the neutralization of those through the use of Instant Oxygen and Acid pHree.
Instant Oxygen concentrate is a convenient and inexpensive way to add vital oxygen to our system. Just 6 to 15 drops in a glass of water will provide additional oxygen to our body, than just a plain glass of water. Feel the instant difference after just one glass. Ordinary water generally contains less than 5 ppm (parts per million). Natural spring waters may contain about double the oxygen of city water. By adding Instant Oxygen we can increase the oxygen level in the water to over 1700 ppm. And our concentrate is so affordable. At less than $10.00 a bottle, you can make up to 150 glasses of water, which costs you less than ten cents per glass!
Some of the benefits of having more oxygen in your system are:
• Higher Levels of Oxygen in the Blood
• Increased Stamina and Energy
• Improved Digestion
• Slows the Process of Aging and Degenerative Disease
• Free Radicals Become Neutralized
• Great for Sports Enthusiasts
Try our Instant Oxygen product today and start to feel the difference immediately!
Recommendations...
Oxygen promotes keen mental alertness. Instant Oxygen™ will jump start your system with an immediate, vigorous burst of Oxygen. Contains NO calories, sugar, sodium, artificial flavors or additives. Available in a 1.3 oz. convenient pocket size. It is recommended to place 6 to 15 drops into an 8 oz. glass of water four to five times daily or as often as needed. |
9.95 |
View |
|
|
pH Calibration Kit 7.0 pH reference
10 packs of 20 mL each |
18.95 |
View |
|
|
TDSCalibration Kit
25 packs of 1382, 20 mL each |
24.00 |
View |
|
|
Water Filter Chlorine Test Strips
Bottle of 50 strips |
17.95 |
View |
|
Clean Tap Monitor
Ideal for home or office use.
Will always ensure a filtration system is clean and working properly.
Be notified immediately when a filtration system needs to be replaced.
Features
The Clean Tap Monitor automatically monitors the quality of a filtration system directly from the base of any standard faucet.
The unit provides an indicator through three L.E.D. lights or beeper (optional).
Specifications:
Filter Volume Capacity Monitor: User adjustable by dip switch
Max. Filter Capacity: 4000 Liters
Power Source: 2 x AA batteries (included)
Dimensions: 6 x 8.8 x 2.4 cm (2.4 x 3.5 x .9 in.)
Processor Weight: 102 g (3.6 oz)
Complete Weight: 161.6 g (5.7 oz)
Three-Part Monitor Process
1. Monitor Processor: By measuring the volume of water passing through the filtration system by the electric program, the Monitor Processor sends the signals to the L.E.D. lamps or buzzer and indicates whether the filters are functioning normally, approaching capacity or past useful capacity.
2. Flow Switch: The Flow switch senses the dispensed water and sends the signals to the Monitor Processor.
3. Monitor: One of three-colored L.E.D. Lamps blinks for 3-6 seconds every time water is dispensed. Green Light indicates the normal function of filters, Yellow light, the readiness to change, and Red Light, the need of immediate change.
Green Light: Filter usage => 0% - 80%
Yellow Light: Filter Use => 80% - 99%
Red Light: Filter Use => 100%
|
24.99 |
View |
|
In-Line Dual TDS Monitor
Measure the tap water coming in vs. the purified water going out of your system at any time.
Use the monitor to determine when the filters need to be changed.
Install the meter for your customers so they'll always know how their system is performing.
FEATURES
Displays TDS levels of the feed water and product water with in & out electrode probes.
Highly efficient and accurate due to its advanced microprocessor technology.
Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.)
Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
Comes equipped with John Guest Quick-Connect T-fittings as shown.
Installs quickly and easily.
SPECIFICATIONS
Range: 0-9990 ppm
Accuracy: ±2%
Cable Length: 24.5" (including sensor)
Fittings: 1/4" standard, also available with 3/8" or 1/2"
Power source: 2 x 1.5V button cell batteries (included)
Battery life: approx. 1000 hours of continuous use
Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
Weight: 79.4 g (2.8 oz.)
|
36.99 |
View |
|
Industrial Dual TDS Monitor
Measure the tap water coming in vs. the purified water going out of your system at any time.
Use the meter to determine when the filters need to be changed.
Install the meter for your customers so they'll always know how their system is performing.
Install on industrial systems such as car washes, manufacturing, and food processing.
FEATURES
Highly efficient and accurate due to its advanced microprocessor technology.
Displays TDS levels of the Feed Water and Product Water with in & out electrode probes.
Auto-Off function conserves battery power. The unit shuts off automatically after 20 seconds.
Dual Range - Measures from 0-999 ppm, with a resolution of 1 ppm. From 1000 to 9990 ppm, the resolution is in 10 ppm increments, indicated by a blinking 'x10' image.
Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver.
Comes equipped with 1/4 inch John Guest Quick-Connect T-fittings as shown. Also available with 3/8" fittings.
Installs quickly and easily.
Differences from the DM-1:
Designed for commercial/industrial applications.
Stronger, water-resistant casing.
Improved design, including an extra large, easy-to-read LCD display.
Longer, waterproof, shielded cables.
Variable mounting bracket.
SPECIFICATIONS
Range: 0-9990 ppm
Accuracy: ±2%
Cable Length: 46" (including sensor)
Power source: 2 AAA batteries (included)
Battery life: over 1000 hours of continuous use
Size: 11.6 x 6.8 x1.8 cm (4.6 x 2.6 x .7in.)
Weight: 201.3 g (7.1 oz.)
|
48.99 |
View |
|
Panel Mount Controller
Install the Panel Mount Controller to constantly monitor TDS levels of water produced by a high-output system.
Adjust the calibration to your needs.
Immediately know if the TDS levels rise above an acceptable level.
The controller installed in a commercial system.
FEATURES
Monitors and controls TDS levels for high output commercial systems.
Large, bright L.E.D. display.
An alarm will sound if the TDS level rises above the user-set level.
Installs easily in minutes.
Includes one sensor probe (see photo).
SPECIFICATIONS
Range: 0 - 999ppm
Accuracy: ±2% f.s.
Resolution: 1 PPM
Temp. Compensation: Automatic (1 - 65 degrees Celsius)
Calibration: Adjustable
Setting: Controlled by on-screen up/down buttons
Relay Control: The unit will transmit an analog signal to a pump/valve when the ppm level reaches or exceeds the control setting
Alarm: Optional steady beep (set by user)
Display: Bright 5/8" L.E.D. display
Probe: 1/2" bushing, 3 meter (9.8 ft) shielded cable
Power supply: AC 110V / AC 220V
Dimensions: 7.2 x 7.2 x 10.2 cm (2.8 x 2.8 x 4 in.)
Monitor Weight: 476 g (1 lb .8 oz)
Total Weight: 680.4 g (1 lb 8 oz)
|
163.99 |
View |
|
pH Paper Refill
Regular Retail: $13.95
Our Price: $9.95
Package contains a single 15 foot roll of 5.5 to 8.0 range replacement paper in a clear dispenser. Providing a 90 day supply of test material when torn into 2 inch pieces. May be used to test your urine or saliva.
This pH replacement roll is the same high quality used in the full Home Test pH Kit.
Safe - Easy - Accurate
1. First, upon waking test your saliva with the pHydrion paper. When you get out of bed, lick and wet the end of a pHydrion test strip with your saliva. Note the color change and write down the pH number. Do this before brushing your teeth, drinking, smoking, or even thinking of eating any food. The optimum saliva pH should be 6.8 to 7.2.
2. Next, test your first urine of the morning. This is urine that has been stored in your bladder during the night that is ready to be eliminated when you get up. You need to pee on a strip of pHydrion paper, note the color change and write down the pH number. The first urine should run optimally between a pH 6.8 to 7.2. If your first urine pH is lower than 6.8 you are deficient in alkaline buffers and need to move to a more alkaline diet rich in fresh green vegetables and fruits. If your first urine pH is higher than 7.2 your alkaline buffers are sufficient to neutralize the acidic food and drink you ingested the day before. To balance the pH of the urine you need to move away from acidic foods and drinks and begin ingesting liberal amounts of electron rich green vegetables, low sugar fruits and healthy polyunsaturated fats.
3. Next, test your second morning urine before eating any food. This number should be the pH of your second urine after you have eliminated the acid load from the day before. The acids should be gone the second time you go to the bathroom so your urine pH should be ideally around 6.8 to 7.2. If the pH is lower than 6.8 then you are in a state of latent tissue acidosis and you are deficient of alkaline buffers such as bicarbonate, sodium, potassium and magnesium. The lower pH is also indicative of a diet high in protein and an increase in acids from proteins including nitric, sulfuric, phosphoric and uric acids. Eliminate from the diet proteins from beef, chicken, turkey, pork and fish to normalize pH at 6.8 to 7.2 while eating liberal amounts of green foods and green drinks and healthy polyunsaturated fats.
4. For breakfast eat an avocado soup, vegetable soup, or drink some fresh almond milk or a fresh green drink. Wait five minutes and then check your urine and saliva again. Write these pH numbers down also. The pH numbers will go up from the first and second morning urine and saliva if you have sufficient alkaline reserves to buffer acids. If you do not then the pH numbers will show very little change or even go down from the early morning pH numbers.
5. Make sure you check your urine and saliva pH between meals, i.e., between breakfast and lunch and between lunch and dinner. The pH should always be between 6.8 to 8.4, right after meals and between 6.8 to 7.2 a couple of hours after meals.
The five tests above show the following :
1. The efficiency of the digestive system to deal with what you ate the night before, i.e., the first and second AM urine and saliva pH. These numbers will change from day to day if you are living an eating acidic. When you begin The pH Miracle Living Plan you will see the pH of the urine and saliva become more constant and balanced at a pH of 6.8 to 7.2.
2. How well you treat yourself in general, i.e., how 'strong' the salivary glands, pancreas, gallbladder and liver are in dealing with excess acidity. This is once again the AM urine and saliva pH. This number shows the overall state of your health, the condition of the alkaline reserve of your body which reflects the diet you have been eating over the last months and years. This pH number stays rather constant and will only change after some work has been done in alkalizing and energizing the body as outlined in the pH Miracle books. Since the saliva and urine pH is an indicator of intracellular pH, saliva and urine pH readings should never be below the pH of the phosphate buffer system, 6.8. (See below).
The most accurate readings of saliva and urine pH is recorded immediately upon awakening--after sleeping at least five hours and before brushing your teeth. It is during sleep that the body removes waste and is in an anabolic state restoring and replenishing the body. For example, if you have a saliva or urine pH of 5.5 and only 5.6 after eating, you know that you are deficient in alkaline reserve and your body is devoid of the minerals necessary to process food properly -- your body cannot adequately respond to the physiological crisis of handling food or drink that is acidic.
3. The pH of your saliva and urine after you eat or drink gives you an indication of your alkaline mineral reserves and your body's ability to deal with the acid residues created from the digestion of that food or drink. It is normal for your pH number to increase after you eat or drink not stay static or decrease. This once again indicates your inability to deal with acid, the deficiency of alkaline reserves and the buildup of latent tissue acidosis. Even if you think of a food
like an avocado or a lemon the pH of your saliva should increase by a whole point. This simple test indicates you have sufficient alkaline reserve minerals to pull into your digestive system to begin the digestive and buffering process. The ideal urine and saliva pH pattern is 6.8 to 7.2 on awakening, 6.8 to 7.2 before eating and 7.2 to 8.5 following any alkaline meal or drink.
A simple test can be done at most any time of the day by eating a few almonds. This will check the adequacy of the alkaline reserve of the body. When a healthy person with adequate alkaline reserves eats a few almonds, the saliva pH almost immediately goes up to a pH of 8.4. The more acidic the food that is eaten, the more rapid the response of the alkaline reserve, and the higher the saliva pH should be following a meal.
4. The pH of the saliva and urine between meals should be kept in the basic range, pH 7.0 to 7.2. After one eats, the stomach releases its necessary HCL to help digest the food. While doing this, it also performs the opposite action, i.e., it makes an equivalent amount of base or baking soda, sodium bicarbonate, that is picked up by the blood stream and delivered to the alkaline glands of the body, the saliva, the pancreas, the gallbladder, the pylorus glands in the duodenum and the liver. The maximum amount of base in the blood and therefore in the urine and saliva occurs one to two hours after you eat.
This rhythm of the acid and base flow of the body is called by Frederick F. Sander, the Base-floods and the Base-tides of the Acid-Base household. This information was first published in 1930, by Frederick F. Sander, a German scientist, in a book called, The Acid-Base Household of the Human Organism and its cooperation with the nail circulation and the rhythm of the Liver. In his book he states that the body fluids and therefore the urine is most acid at 2:00 A.M. (pH 5.0 to 6.8) in the morning (the base tide) and most alkaline at 2:00 P.M. (pH 7.0 to 8.5) in the afternoon (base flood).
'The ideal pH numbers depend on the time of day. Plotted on a curve it looks like the double hump of the back of a camel. Two times a day the urine should be alkaline and that is the top of the humps and corresponds to 10 A.M. and 2 P.M., the alkaline tide after meals. During the rest of the day the pH should be between 6.8 and 7.2. This is optimal urine. The first urine in the morning should be more acidic because of the decalcification that takes place during the night in neutralizing excess acids.'
If all the acids generated in a day of digestion are, respiration, metabolism and degeneration are not all flushed out during the night they accumulate, day after day. The results are the expression of states of imbalance as the body desperately tries to maintain the alkaline fluid pH at 7.365. The day to day buildup of acids affects each of us differently depending on our genetics, lifestyle and diet. I have found that acids settle in the weakest parts of the body and if not eliminated through the bowels, urinary system, lungs or skin, acids are then bound to fat and stored on our hips, thighs, stomach, breasts and brain. Bottom-line acids are the expression of all symptomologies and the direct cause of ALL sickness and disease.
Monitoring your saliva and urine pH puts the responsibility of caring for your health back into your hands. Measuring the saliva and urine pH guides your therapy and shows you how living, eating and drinking determines the quality and quantity of your life. You should monitor your saliva and urine each day for at least 12 weeks or until you establish your balanced pH at 6.8 to 7.2. Once you have established a balanced saliva and urine pH at 6.8 to 7.2 you can reduce the number of tests to once a day or 2 to 3 times a week. |
9.95 |
View |
|
|
pH Reagent Drops 1oz bottle for all Ionizer models
pH Reagent Drops 1 ounce bottle for all Ionizer models - comes with a color test strip card |
9.95 |
View |
|
|
|
|
